Hot Racing 26mm adjustable HD compression spring Oil damper set for Axial SCX30 heavy custom Rock Crawler projects
FEATURES:
- CNC machined T6 aluminum shock bodies.
- Precision machined stainless steel 1.5mm HD shock shaft for durability
- Oil-filled for real damping action
- Three HD spring rates included
YOU WILL RECEIVE:
- Four (4) assembled shocks
- Four (4) silver springs (Med) (0.3)
- Four (4) black springs (Firm) (0.35)
- Four (4) gold springs (Ex Firm) (0.4)
- One (1) oil dropper
REQUIREMENTS:
- Installation on vehicle
- Silicone shock oil of modeler's choice
SPECIFICATIONS:
- Extended center to center length: 26mm (inch)
- Compressed center to center length: 23mm (inch)
- Overall length: 30mm (inch)
- Body diameter: 3.85mm (inch)
- Shaft diameter: 1.5mm (inch)
COMMENTS:
- Building mini RC emulsion shock involves creating a consistent mix of oil and air for smooth damping . Filling with high-quality silicone oil, and loosening the cap to push out excess oil while the shaft is half compressed
The key to a perfect emulsion setup is repeatability:
The "Half-Shaft" Rule: By holding the shaft at the midpoint while tightening the cap, you ensure there is enough air volume to compensate for the shaft entering the shock body
Consistency: The air and oil will naturally mix into a foam during use. For this to work well, you must build all four shocks exactly the same way so the damping rate remains uniform across the car
Bleeding: If the shock feels "rock hard" at the top of the stroke, there is too much oil; if it feels "crunchy" or lacks damping, there is too much air
- When installing a different spring on your setup, its essential to first remove the cap and spring adjuster.
This preliminary step is crucial for ensuring a smooth installation process.
We advise against attempting to remove the shock end for this process,
