This is the Hot Racing Monster Blower clip-on universal heat sink and fan for the 1/8 Arrma Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX or custom projects.
- Forced airflow over motor heat sink to increase cooling for improved efficiency and performance
- Large 50x50x11mm 7-blade fan
- Clip-on design for simple installation
- Black and Blue anodized aluminum heat sink provides efficient heat transfer
- Adapter with EC5
- 12AWG and 24 AWG silicone wire
YOU WILL RECEIVE:
- One (1) clip-on heat sink with fan
- One (1) EC5-style adapter connector
- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (e. g. blue Loctite) on fan mount screws
- Ensure fan blades are protected
- This system uses a EC-5 Connector. If your system uses another type of connector, you'll have to switch connectors, or use an adapter.
- Fan Size: 50x50x11mm
- Input Voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
- If you are using single 6 cell pack please order AON505F02
- Replacement Hot Racing 50x50x11mm fan is MH505F
- Please Note some picture might show it had XT90 plug but they all have updated to EC5 plug
description revised by: SN January 30, 2019