Hot Racing twin steering servo conversion kit for the Losi 1/5 Desert Buggy XL
FEATURES:
- Adds another servo for extra steering performance- Large receiver battery box accept larger batteries for longer run times
- Black, silver, and red anodized CNC machined 6061-T6 aluminum components
- Direct DC power harness provides power straight to the servos allowing only the signal wire to run to the receiver. This allows the servos to draw the needed power, without the risk of damaging the receiver.
YOU WILL RECEIVE:
- One (1) dual servo mount
- One (1) battery and receiver battery box
- Two (2) steering servo arms
- One (1) wire harness
- All necessary hardware including servo mount lock plates, servo mounting screws, rod ends etc.
REQUIREMENTS:
- Assembly and installation
- Two (2) 1/5 scale steering servos
- Connector from battery to Futaba J-Type socket
- Receiver/servo battery. See below for battery compartment size. See receiver and servo specifications to determine suitable battery voltage.
- Recommended to check all screws and use medium thread lock (e. g. blue Loctite), as needed. Screws may not have thread lock from the factory.
SPECIFICATIONS:
- Servo horn spline: 15T
- Battery compartment: 139.5x27x43mm
- RB = Receiver battery power input
- BI = 7.2V battery in put to power servo and receiver
- SS = Steering servo plug in
- TS = Throttle servo plug in
- SW1 = Steering servo signal wire (plug in to Ch-1)
- SW2 = Throttle servo signal wire (plug in to Ch-2)
COMMENTS:
- This steering system is designed for use with the following 1/5 scale servos:
- Losi LOSB0884 S900S 1/5 Scale Steering Servo w/Metal Gears 5IVE-T (Stock Servo)
- Spektrum SPMS901 1/5 Scale Steering Servo DBXL (stock Servo)
- Savox SV-0235mg High Voltage 5th Scale Digital Servo-savsv0235MG
- Savox SV-0236mg High Voltage 5th Scale Digital Servo-savsv0236MG
- Servos of the stock servo dimensions are compatible
description revised by: SN November 8, 2017
