This is the Hot Racing Monster Blower clip-on universal heat sink and fan for the Axial 1/8 Yeti XL, or any custom project
FEATURES:
- Forced airflow over motor heat sink to increase cooling for improved efficiency and performance
- Large 40x40x10.3mm 7-blade fan
- Clip-on design for simple installation
- Red anodized aluminum heat sink provides efficient heat transfer
- Adapter with Deans-style connectors
- 24AWG silicone wire
YOU WILL RECEIVE:
- One (1) clip-on heat sink with fan
- One (1) Deans-style adapter connector
REQUIREMENTS:
- Installation
- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (blue threadlocking compound) on fan mount screws
- Ensure fan blades are protected
- This system uses a Deans-style connector. If your system uses another type of connector you'll have to switch connectors or use an adapter. See Hot Racing MH404F06 for equivalent system with a TRA-style connector
SPECIFICATIONS:
- Fan Size: 40x40x10.3mm
- Input Voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
COMMENTS:
- For equivalent heat sink and fan, anodized blue and with a TRA-style connector, see Hot Racing ERV404F06
- Replacement Hot Racing 40x40x10.3mm fan is MH404F
description revised by: SN February 18, 2019
