Hot Racing's rear anti-sway bar (e. g. anti-roll, swaybar, sway bar) set for the 1/8th scale Axial Yeti XL kit and RTR vehicles
FEATURES:
- Designed for quick response, this system use a spring steel torsion bar to keeps torque twist and body lean to a minimum during acceleration and cornering
- Two sway bar tuning options, including a soft and stiff. The soft bar has a 21mm flat machined at the center.
- Aluminum sway bar arms have three mounting positions to fine tune the anti-sway bar
- Anti-sway bar arms and links are anodized red durability, corrosion resistance, and great looks Easy bolt-on application
YOU WILL RECEIVE:
- One (1) stiff spring steel torsion sway bar
- One (1) soft spring steel torsion sway bar
- Two (2) aluminum anti-sway bar arms
- Two (2) aluminum anti-sway bar links
- Mounting hardware, including screws, bushings, washers, spacers, and o-rings
- 2mm hex wrench
REQUIREMENTS:
- Recommended to use a removable-type locking adhesive on screws threading into metal
- Tighten setscrew that attaches anti-sway bar arm to the bar itself snugly, but not over-tight. Use a removable threadlock on the setscrew and check tightness regularly.
COMMENTS:
- For the front sway bar set, order Hot Racing YEX311F
- For the CNC machined aluminum rear sway bar clamps, order Hot Racing YEX311MO2
- Replacement hardware is Hot Racing RYEX311RH
description revised by: SN September 19, 2016
